Was möchten Sie tun?

Floor Levelling:
Strictly on the level.

More balance!

Height differences between various rooms in your home are not only unsightly but also dangerous tripping hazards.
With PROBAU self-levelling compounds you can easily and safely provide for "more balance" again. PROBAU products are only available in BAUHAUS centres.

This is how it works:

A room with an old linoleum floor is 2cm higher than an adjoining room.
In order for this to be tiled throughout, the height difference needs to be compensated.
As the entrance area has to be quickly accessible again, the choice of a fast-curing levelling compound is recommended.
To remove the linoleum, cut the old flooring into strips and tear off in strips from the substrate.
Completely remove old glue residue from the substrate with a scraper.
Sweep the substrate thoroughly with a broom.
Provide edge strips all around the wall base. Then, with the help of a tube level, aim to level the room and transfer the dimensions to the edge strip.
Wet the substrate thoroughly with a brush, as this helps the adhesive bond.

Mix up the PROBAU Quick Self-levelling Compound
and immediately spread on the substrate, starting from a corner.

Support the uniform flow with a rubber squeegee.
Deflate the resulting air bubbles by brushing them with the broom.
The difference in height of 2 cm is dealt with within the shortest possible time.
And: The area is accessible again after only 3 hours!
Finally, cut off the protruding edge strips with a carpet knife.
The very next day, you can lay tiles.

Good to know: The substrate must be sound, clean, dry and in a crack-free condition. To improve the adhesion and elasticity of the PROBAU Self-levelling Compound, we recommend pretreating the subsurface with PROBAU Bonding Emulsion.

Everything you need:

  • Scraper
  • Spatula
  • Broom
  • Brush
  • Mortar tub
  • Rubber squeegee
  • Drill with agitator
  • Tube level
  • Pencil
  • Carpet knife